7.5 ton @ 80kph Ultimate 180° Swing Barrier. Manually Operable
- Easy to install and operate
- Maximum width: 10,000mm
- 7.5 ton @ 80kph
- Crash Tested to IWA14
Frontier Pitts IWA 14-1 Bi-directional, Lightweight, manual swing HVM Barrier Gate is easy to install and easy to operate. At the forefront of technology, the sleek, manually operated Terra Ultimate 180° Swing Barrier is the ideal solution for access points which need to be secured with occasional access, out of hours security, or remote locations with power supply restrictions.
IWA14 Terra Ultimate 180° Swing Barrier
The Terra Ultimate 180° Swing Barrier can be easily installed in a shallow embedment depth of just 350mm (foundation depth 500mm – foundation type B), whilst securing entrances up to 10 metres. The Terra Ultimate 180° Barrier is secured by an anti-tamper locking mechanism which encases the gate locking pin and is resistant from attack by a wide array of hand tools and battery powered tools. It is a bi-directional HVM solution, available with right or left hand hinging, therefore the impact beam can be opened in either direction depending on site requirements.
Product Specs
- Successfully impact tested to the new International IWA 14-1 specification
- Bi-directional Swing Barrier; the impact beam can be opened in either direction depending on site requirements
- Sleek Design
- Shallow embedment depths of only 350mm required
- Manual operation; Ideal for remote locations with power supply restrictions.
- Easy to install and operate
- The Terra Ultimate 180° Swing Barrier is secured by an anti-tamper locking mechanism which encases the gate locking pin and is resistant from attack by a wide array of hand tools and battery powered tools.
- Maximum width: 10,000mm
- IWA 14 Test dimensions: width 6000mm
Case Studies
Parliament House
GK Solutions successfully retrofitted a blast mitigation system for the windows of the Australian Parliament House in Canberra, addressing three main challenges: meeting stringent blast resistance ratings, integrating seamlessly with the existing architectural framework, and preserving the building’s heritage aesthetic.
Department of Defence
GK Solutions supplied and installed blast and forced entry-resistant doors for the Australian Department of Defence’s Explosives Ordnance (EO) storage buildings. The project included a 3-metre by 3-metre automated sliding door, a pedestrian access door and an emergency egress door. Challenges included meeting the stringent safety standards for EO storage.
Government Site, Melbourne
The secure government site in Melbourne faced a significant challenge with its gates located at the bottom of a hill, directly in the path of water, sand and gravel runoff from an unsealed parking area at the top. During heavy rains, the runoff would create conditions unsuitable for traditional in-ground bollards.
Protection of Heritage Windows
In Sydney and Melbourne, heritage-listed buildings with decorative windows required enhanced protection against blasts and forced entry. The challenge was to ensure the security measures did not detract from the buildings’ historical and aesthetic value. In collaboration with security consultants, we developed a solution that balanced security and preservation.
Transport NSW
Transport New South Wales needed a temporary hostile vehicle mitigation (HVM) solution for securing major roads, such as the Sydney Harbour Bridge, during events like New Year’s Eve fireworks. Similarly, the Melbourne government required a rapid-deployment solution for protecting high-attendance public spaces.
